To Next Page

To Previous Page

CC 102/C/122/C/132/142/C O102EN3

Fig. 13 Comfort seat (optional)

1. Backrest slope

2. Length adjustment

3. Weight adjustment

4. Transverse adjustment (optional)

Operator’s seat – Setting

1. Set the operator’s seat in a comfortable position and

so that the controls are easily accessible.

2. The seat has the following adjustment capabilities:

– Length adjustment (1)

– Backrest slope (2)

– Weight adjustment (3)

Always ensure that the seat is secure

before beginning operation.

1. Set the operator’s seat in a comfortable position and

so that the controls are easily accessible.

2. The seat has the following adjustment facilities:

– Backrest slope (1)

– Length adjustment (2)

– Weight adjustment (3)

– Crosswise (4)

Comfort – Adjusting

BEFORE STARTING

Fig. 12 Operator’s seat

1. Lever—length adjustment

2. Lever—backrest slope

3. Lever—weight adjustment

Dynapac CC142 Operation Manual

Other manuals for Dynapac CC142