5
CC 102/C/122/C/132/142/C O102EN3
SAFETY WHEN DRIVING
Fig. 3 Operator’s station
1. ROPS
2. Seat belt
Sitting position
Always remain seated in the operator’s seat for all
driving. If the operator rises from his seat the horn will
sound, or on some versions the brakes will be applied.
Always fasten the seat belt if the machine
is equipped with one. Should the machine
turn over there is a serious risk that the
operator will fall out with the machine on
top of him if he has not fastened the seat
belt.
The seat belt is standard equipment on rollers equipped
with a Roll Over Protective Structure (ROPS) (1) or a
cab.
1
2
To Next Page
Loading...
