Dynapac LH800 - Technical Data - Machine; Machine Specifications; Fluid Capacities and Engine; Noise and Vibration Levels

11ILH800EN2
Weight LH800
Operating weight
EN500, kg (lbs) 820 (1,808)
Compaction data
Vibr. frequency, Hz 53
Vibr. frequency, vpm 3180
Centrifugal force, kN (lbf) 95 (21,400)
Amplitude, mm (in) 2,5 (0.98)
Operating data
Speed of travel,
m/min (feet/min) up to 30 (98)
Max. tilt, % 35
Volumes
Fuel tank, lit. (qts) 7,0 (7.4)
Crank case, lit. (qts) 1,9 (2.0)
Hydraulic fluid, lit. (gal) 27,0 (7.1)
Eccentric element, lit. (qts) 1,0 (1.1)
Fuel consumtion, l/h (qts/h) 2,3 (2.4)
Engine
Model Hatz
1D90V
El.start
Output, kW (hp) 11,5 (15.4)
Engine speed, rpm 3000
Noise and Vibrations
The following sound and vibration levels are determined in accordance with the operating cycle
described by EU directive 2000/14/EC.
Guaranteed acoustic power level
LwA dB (A) 109
Sound-pressure level at the operator’s ear (ISO 6396)
LpA dB (A) 84
Hand and arm vibration (ISO 5349-1)
ahv m/s
2
- (Radio)
During operation these values may differ because of the actual operational conditions.
TECHNICAL DATA