Dynapac LH800 - Maintenance - Scheduled Intervals; 100-Hour Maintenance; 500-Hour; Annual Maintenance; 1000-Hour; Three-Year Maintenance

23ILH800EN2
MAINTENANCE – SERVICE POINTS
Item in fig.1 Maintenance see page Comments
9 Change eccentric element oil 27
After three years / 1000 hours of operation
Item in fig.1 Maintenance see page Comments
8 Change engine oil 25
10, 11 Change hydraulic fluid and filter 26
4 Clean / replace oil filter See engine manual
2 Clean / replace air cleaner elements See engine manual
Check fuel injection pump See engine manual
Check fuel injection nozzle See engine manual
Adjust valve clearance See engine manual
Every 500 hours of operation / Once a year
Item in fig.1 Maintenance see page Comments
13 Empty water separator 25
8 Change engine oil 25
10 Clean airbreather filter 25
10 Check level in hydraulic tank 25
2 Clean / replace air cleaner elements See engine manual
Every 100 hours of operation