Dynaudio AIR 15 - AIR Control software - introduction

AIR Control software
Dynaudio Professional AIR reference manual – 2014-09-28 67
AIR Control software –
introduction
AIR Control software is the installation and congura-
tion software for the Dynaudio Professional AIR series
monitors.
AIR Control software allows you to carry out advanced
calibration and alignment of your AIR monitoring sys-
tem. The software provides access to advanced tools
and features of AIR monitors and subwoofers, including
timing and SPL calibration and parametric equalizers
for each monitor.
AIR Control also lets you dene and store custom set-
ups and presets with selective parameter locking.
About TC PC-IP installer software (discontinued)
AIR Control replaces the TC PC-IP installer software,
which was developed for professional installers. The
new AIR Control application design is easier to use and
offers an even more efcient way to ne-tune your AIR
monitoring system.
AIR Control software
main features
Global
►
Advanced conguration, calibration and installation
software for Dynaudio Professional AIR
►
Reference levels control for calibrated listening
►
Advanced bass management with variable cross-
over frequencies
►
EQ link: Group your speakers using up to 3 EQ
groups
►
Advanced locking of parameters
►
Front panel control lock
►
Setups can be saved as presets
►
For OS X and Windows
Per monitor controls
►
Four band parametric precision EQ
►
Adjustment of individual delay times and calibration
levels
►
Role and room position control
►
Test tone generator
AIR Control software
system requirements
System requirements for Mac OS X
►
CPU: Intel CPU
(min. 2 GHz recommended)
►
RAM: 2 GB RAM
►
Operating system: Apple OS X 10.8 or higher
►
USB 2.0, USB 3.0 or serial port
System requirements for Microsoft Windows
►
CPU: Intel-compatible CPU
(min. 2 GHz recommended)
►
RAM: 2 GB RAM
►
Operating system: Microsoft Windows 7 or higher
►
USB 2.0, USB 3.0 or serial port
Due to the touch-based user interface, AIR Control
software works very well with Windows-based tablets.
However, please note that AIR Control software will not
run on Android or iOS tablets (iPads).
For more information on the cables/adapters required
to connect your computer and your AIR system, see
“Cables” on page 82.