DynaVox DBT200 - Operation

OPERATION
Power supply
The DBT200 can be driven by the supplied 230V power supply or by 4 x AA batteries.
DAB+ / UKW Antenna
1. Unlock the antenna at the top of the housing.
2. Pull out the antenna elements completely.
3. Align the antenna to get the best possible reception.
4. Place the device in a different position (preferably near a window) if reception is
not sufcient.
Operation
Switch on/off the radio by moving the switch at the side to the ON or OFF position.
Navigating the menu
Press and keep the button Menu/Info pressed to enter the menu. You can navigate the
menu by pressing the buttons TUN < > or < >. Enter the menu points by pressing
the button ENTER shortly. By pressing the button Menu/Info shortly you can return to
the previous menu level.
Changing the volume
Press + or – at the button volume to increase or decrease the volume.
6