BT Audio
To use the BT function, use the button „MODE“ to switch to the responding BT menu
point. Now locate and select the DBT200 in the list of available devices of your BT-
compatible source device. The wireless cross-link port (BT) can be deactivated (swit-
ched off) with the input button „MODE“ by selecting DAB, FM or clock.
Use a earphone or headphone
Earophones/headphone equipped with a 3.5 mm jack plug can be plugged into the
headphone socket of the unit. As long as a headphone is plugged in, the internal
speaker is switched off.
Attention!
Unexpectedly high volume that can damage your hearing.
TECHNICAL SPECIFICATIONS
Funktions: DAB/DAB+, FM, BT (V5.0), 2 x Alarm,
earphone/headphone input
Prsets: 40 (DAB/FM)
Display: 61 mm (2.4“) TFT
Music power: 3W
Music Frequenzy range: 100 Hz - 18 kHz
FM frequency range: 87,5 - 108 MHz
DAB frequency range: 174,928 - 239,2 MHz
S/N ratio: >= 70 dBA
Distortion: <= 1 %
BT range: 10 m
Power supply: Batteries 4 x AA (not incl.),
ext. USB power supply
5V/1200 mA (incl.)
Measurements: 190 x 90 x 45 mm
Weight: 335 g
Minimum quality: highly sensitive audio ampliers are apt to generate demodulation
products in the vicinity of rf sources.
9
To Next Page
Loading...