DynaVox Maestro - Page 6

6 DynaVox
NOTE
For ease of use while customizing the Maestro, you may choose to connect
a USB mouse and/or USB keyboard.
Top:
1 Power Button: Press to turn the Maestro on. The button
glows blue when the device is turned on.
(To turn the Maestro off, select Main Menu > Setup >
Setup Menu > Shut Down.)
2 Charging Indicator: Lit when the battery is charging.
Turns off when the battery is fully charged.
3 Hard Drive Indicator: Blinks when accessing the hard
drive.
Front:
4 Speakers: Front-firing speakers provide an impressive
range of volume.
5 Infrared Device: Sends & receives IR signals. Use your
Maestro like a universal remote control.
6 Camera: Use for taking custom pictures.
7 Microphone: Use for recording custom sounds.
Back:
8Battery: (extended battery pictured here)
Provides power to the Maestro.
9 Battery Buttons: Hold battery in place. Use these to
remove the battery for external charging.
Left Side
Ports:
10 Charger Port: Plug in the DC adapter/charger to charge
the Maestro battery.
11 Speaker/Headphone Jack: Connect external speaker to
increase volume, or headphones for private audio.
12 Microphone Jack: Connect external microphone for
recording custom sounds.
Right Side
Ports:
13 Switch Jacks (2): Connect external switch(es) for
scanning access.
14 USB Ports (2): Connect to any USB-enabled accessory,
such as a USB flash drive ("thumb drive"), a CD/DVD
drive (for file sharing/backup purposes), a USB keyboard,
or a USB mouse.