47
blue LED starts flashing and signals the connection
availability. (If you have inserted memory storages
at inputs 10 and 11, you may have to switch to the
BT channel by pressing the "MODE" button [7]
first).Now locate the amplifier in the list for availa-
ble devices with your BT-compatible source device.
You can find more information in the operating
instruction of your source device. The VT-80 will
appear in the list under the name "DYNAVOX". After
you have selected it, the connection will get confir-
med acoustically. From now on, all audio signals are
transmitted to the Dynavox VT-80.
Connecting an additional power amplifier or
active subwoofer
The RCA jacks "PRE-OUT" (18), on the back of the
unit, can be used to add another output stage (eg
for sounding a further room) or an active subwoofer
to the volume controled Stereo output (line level),
of the currently selected source. The output level of
the pre-amplified output "PRE-OUT" (18) depends
on the volume setting, the sound control (BASS,
TREBLE) and the insertion of a headphone. Connect
this signal output to the signal input ("LINE IN" /
"INPUT" etc.) of the power amplifier / active sub-
woofer using commercially available RCA cables.
To Next Page
Loading...
Need help?
General
