Need help?Do you have a question about the DynaVox VT-80MK and is the answer not in the manual?
General| Input Sensitivity | 0.5V |
|---|---|
| Signal-to-Noise Ratio | 90dB |
| Total Harmonic Distortion | 0.1% |
| Frequency Response | 20Hz - 20kHz |
| Input Impedance | 100k Ohms |
| Vacuum Tubes | 12AX7 |
| Inputs | RCA |
| Outputs | Speaker Terminals |
Details the HiFi compact amplifier's features, inputs, outputs, and capabilities.
Warns about mains voltage hazards, improper handling, and voiding the warranty.
Covers power cord handling, cleaning, ventilation, and environmental exposure.
Explains WEEE compliance, disposal procedures, and CE mark requirements.
Describes the auto-shutdown function, its activation, and deactivation.
Details power button, headphone, SD/USB ports, and treble/bass adjustments.
Explains speaker output selection (A/B) and input source selection (AUX IN).
Describes the display screen, IR receiver, and master volume control.
Explains mode switching, start/pause, and track/channel navigation.
Details repeat modes and equalizer presets for sound customization.
Details analog RCA inputs (AUX1/AUX2) and the PRE-OUT signal output.
Explains speaker connections (A/B) and the power socket for mains connection.
Details FM and BT antenna connections and the location of the fuse holder.
Explains the auto-standby function switch and how to enable/disable it.
Covers mode switching, mute function, and equalizer preset selection.
Details volume increase, and switching between USB/SD sources.
Explains playback, pause, and moving back/forward tracks or channels.
Describes volume decrease and various repeat options for playback.
Illustrates connecting headphones and USB/SD media devices.
Warns about the correct impedance (8-16 Ohm) for connecting four loudspeakers.
Shows connections for external audio sources like computers and mobile devices.
Provides general guidance on making secure and correct cable connections.
Details connecting analog (AUX) and digital (SD/USB/BT/Tuner) sources.
Explains the Bluetooth connection process and USB/SD card playback.
Describes FM tuner operation and using the PRE-OUT for subwoofers.
Instructions for connecting headphones and their effect on speaker output.
Guidelines for connecting speakers, including impedance and wiring polarity.
Detailed steps for connecting speaker wires and banana plugs securely.
Explains the interaction between remote and master volume controls.
Clarifies volume adjustment differences for analog and digital inputs.
Instructions for safely connecting the power cord and turning on the unit.
To Next Page
