41
(12) first). Now locate the amplifier in the list for
available devices with your BT-compatible source
device. You can find more information in the opera-
ting instruction of your source device. The VT-80MK
will appear in the list under the name "VT-80MK".
After you have selected it, the connection will get
confirmed acoustically. From now on, all audio
signals are transmitted to the Dynavox VT-80MK.
USB/SD
The songs are played in the same sequence in
which they were saved on the memory card USB/SD,
no matter if they were saved in different folders.
Choosing a special folder is not possible. The name
of the actuallly played music title is shown in the
display. In Mode RPT (Folder) you can repeat the folder
content in which the actual played song is located.
Tuner
The Dynavox VT-80MK has got a simple integrated
FM Tuner. Just like the digital inputs it can be selec-
ted with the mode button with the input selector
switch in position AUX3. With shortly pressing the
play/pause button in tuner mode the autoscan of
the channels starts. All found channels are saved
and get a sequential channel number. This channel
numbers can be selected with the number buttons
on the remote control or by pressing the fast for-
ward/backward buttons to reach the previous or
next channel. Sorting or deleting of the channels is
not possible.
Connecting an additional power amplifier or
active subwoofer
The RCA jacks "PRE-OUT" (20), on the back of the
CONNECTION AND COMMISSIONING
To Next Page
Loading...
Need help?
General
