Need help?Do you have a question about the DynaVox VT-80 and is the answer not in the manual?
Connect analog sources via RCA and digital media via SD/USB.
Utilize PRE-OUT jacks for expanding audio output or connecting subwoofers.
Connect a 3.5mm jack headphone; speaker output is automatically muted.
Connect speakers using appropriate cables and ensure correct impedance (4-16 Ohm).
Connect the power cord to the unit and a suitable AC power outlet.
Turns the unit on and off; disconnects from power supply when off.
Adjusts the overall volume level for all audio outputs.
Manages playback of digital music signals from USB/SD/BT sources.
Navigates to the previous track during music playback.
Navigates to the next track during music playback.
Lowers the volume of digital music signal inputs.
Raises the volume of digital music signal inputs.
Selects between SD, USB, and Bluetooth inputs; long press powers the player.
Adjusts the high-frequency (treble) content of the sound.
Adjusts the low-frequency (bass) content of the sound.
Selects speaker output pairs (A, B, or A/B).
Chooses between AUX1, AUX2, and AUX3 (SD/USB/BT) inputs.
To Next Page
General
