53
Control of the
bass sections
Switching between
connected loudspea-
ker pairs
BASS
(13)
SPEAKER
(14)
Use the "BASS" control on the front panel to control the amount of
low sound in the sound image. Clockwise rotation amplifies the set
intensity. Movement in the counterclockwise direction decreases the
intensity. In the center position, the depth components of the input
signals remain unchanged. The tone control affects the signals from
the speaker terminals (19), the headphone (9) and the pre-amplified
signal output "PRE-OUT" (18).
This rotary control can be used to switch between the two loud-
speaker pairs (A and B). The marking on the rotary knob provides
information about the selected pair.
When speakers with appropriate impedance (8-16 Ohm) are used,
two pairs of speakers can be operated simultaneously (A / B).
Operation Button(s) Description
To Next Page
Loading...
Need help?
General
