50
Operation
Power switch
Volume Control
Start or stop the
playback
Button(s)
POWER
(1)
VOLUME
(2)
(3)
Description
The unit is switched on and off at the front panel. If the switch is
in the off position, the unit is disconnected from the power supply.
When switched on, the red LED in the power switch lights up.
Before switching on, the volume setting (2) should be reduced as a
precaution.
Turn the "VOLUME" knob clockwise to increase the volume and
counterclockwise to decrease the volume. The volume setting
affects the signal level of the loudspeaker connections (19), the
headphone (9) and the pre-amplified signal output "PRE-OUT" (18).
Starts the playback of incomming digital music signals (USB/SD/BT)
or interrupt them.
OPERATION OF THE UNIT
To Next Page
Loading...
Need help?
General
