27
1. POWER
Switches the amplifier on and off.
2. USB
Jack for USB memory stick.
3. Headphone jack plug ( )
This 3,5 mm jack plug allowes the use of a head-phone
with an impendance of 32 - 600 Ohm.
4. BASS
Regulates the low tone content of the output signal.
5. TREBLE
Regulates the high tone content of the output signal.
6. Balance
Regulates the volume of the speaker outputs left/right.
7. SPEAKER (A, B, A/B)
Regulates the signal output of the speaker connec-tions.
With the switching positions A and B you’re able to turn
on and off the outputs „SPEAKER A“ and „SPEAKER B“.
With the switching position A/B, under usage of suitable
speakers (8 - 16 Ohm), you’re able to use both outputs
„SPEAKER A“ and „SPEAKER B“ at once.
8. Move Back ( )
Moves back one track during the song playback of
digital music signals (USB/BT).
9. Start/Pause ( )
Starts the playback of incomming digital music signals
(USB/BT) or interrupt them.
10. Move Forward ( )
Moves forward one track during the song playback of
digital music signals (USB/BT).
11. MODE
Switches between the input possibilities USB, BT, AUX,
Phono, coax and optical.
12. VOLUME
Regulates the volume of the outputs
„SPEAKER A + B“, „OUTPUT“ and „ “.
To Next Page
Loading...
