Dynex DX-15E220A12 User Manual (English)

Other manuals for Dynex DX-15E220A12

Quick Setup Guide2 pages

Guide De L'Utilisateur50 pages

Important Information12 pages

Information Importante12 pages

Guía Del Usuario50 pages

Specifications1 page

Información Importante12 pages

Guide D'Installation Rapide2 pages

Guía De Instalación Rápida2 pages

Questions and Answers:

R
Rebecca CookAug 22, 2025
What to do if my Dynex DX-15E220A12 has no picture and sound?
- M
  Michael MorrisAug 22, 2025
  If your Dynex TV screen is dark and there's no sound, try the following: * Press on the TV or the remote control. * Ensure the power cord is plugged in. * Check that the video cables are securely connected to the back of your TV. * Make sure that the correct video input source is selected. * Try another channel to rule out station issues. * Confirm the incoming signal is compatible. * Ensure the antenna or cable TV is correctly and securely connected. * Check the closed caption settings, as some TEXT modes can block the screen. * Adjust the contrast and brightness. * Make sure that the Audio Only option is set to Off.
I
ichristensenSep 1, 2025
How to fix Dynex LCD TV if control buttons do not work?
- E
  ellisjefferySep 1, 2025
  If the control buttons on your Dynex LCD TV do not work, ensure that the Button Lock option is set to No. Unplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV.
J
Javier HaydenAug 31, 2025
How to fix Dynex LCD TV with no color or dark picture?
- A
  angelagarnerAug 31, 2025
  If your Dynex LCD TV has no color, a dark picture, or incorrect color, try another channel to rule out station problems. Adjust the color saturation. Make sure that the video cables are connected correctly and securely to the back of your TV and that the antenna or cable TV is connected correctly and securely. If you are using an antenna, check the digital channel signal strength and, if it is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
K
kayla10Aug 30, 2025
Why is my Dynex LCD TV picture quality poor on some channels?
- P
  Paula GarciaAug 30, 2025
  Poor picture quality on some channels of your Dynex LCD TV may be due to a weak signal from the broadcaster or cable TV provider. If you connect to cable or satellite TV without a set-top box and experience poor picture quality, you may need to install a set-top box to improve signal reception and picture quality. Contact your cable or satellite TV provider about upgrading to a set-top box.
J
Jonathan LewisAug 28, 2025
How to fix dark or poor picture but good sound on Dynex LCD TV?
- N
  Nicole NicholsonAug 29, 2025
  If your Dynex LCD TV has a dark, poor, or no picture but the sound is good, try another channel to rule out station problems. Check that the antenna or cable TV is connected correctly and securely. Make sure that the Audio Only option is set to Off. Adjust the brightness and ensure the correct picture mode is selected. If you are using an antenna, check the digital channel signal strength. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier. Also, make sure that the video cables are connected securely to the back of your TV. The video cable(s) you are using may be bad, so try a new set.
M
Mark GrayAug 27, 2025
What does it mean when my Dynex LCD TV says 'No signal'?
- S
  Sandra SimpsonAug 27, 2025
  If your Dynex LCD TV displays a “No signal” error message, press the INPUT button and make sure you have selected the correct input for the device or service you are trying to use. If you are using a cable or satellite box, use the remote that came with that box to change channels.
H
hconwayAug 26, 2025
How to fix Dynex LCD TV with good picture but no sound?
- S
  Sandra HallAug 26, 2025
  If your Dynex LCD TV has a good picture but no sound, first, increase the volume. Check if headphones are plugged in and unplug them. Make sure the sound is not muted and that the correct audio mode is selected. Verify that the audio cables are connected correctly and securely to the back of your TV. Ensure the antenna or cable TV is connected correctly and securely. If you are using an antenna, check the digital channel signal strength. Finally, the audio cables you are using may be bad, so try a new set.
O
Olivia HinesAug 25, 2025
What to do if my Dynex LCD TV has no picture and no sound?
- R
  Richard KochAug 26, 2025
  If your Dynex LCD TV has no picture and no sound, start by pressing the power button on the TV or the remote control. Check that the video cables are securely connected to the back of your TV and that the power cord is plugged in. Adjust the contrast and brightness settings. Ensure the correct video input source is selected. Try another channel to rule out station problems. Confirm that the incoming signal is compatible. Also, make sure the antenna or cable TV is connected correctly and securely, and check the closed caption settings to ensure no TEXT modes are blocking the screen.
B
baguilarAug 25, 2025
Why is my Dynex LCD TV remote control not working?
- B
  Bryan MaldonadoAug 25, 2025
  If your Dynex LCD TV remote control isn't working, make sure the power cord is correctly connected to the TV and a power outlet. Ensure there are no obstructions between the remote and the sensor on the front of the TV, and that you're pointing the remote directly at the sensor. Also, verify that the batteries are installed correctly or try replacing them with new ones.

Dynex DX-15E220A12 Specifications

General

Screen Size	15 inches
Display Type	LED
HDMI Ports	1
USB Ports	1
Aspect Ratio	16:9
Refresh Rate	60 Hz
Built-in Speakers	Yes
Resolution	720p (HD)
Inputs	HDMI, RF, Composite