To Next Page
S
Shawn OconnorSep 6, 2025
How to fix double images on my Dynex LCD TV?
- TThomas ChapmanSep 6, 2025
To correct double images on your Dynex LCD TV, use a highly directional outdoor antenna, cable TV, or satellite TV.
How to fix double images on my Dynex LCD TV?
To correct double images on your Dynex LCD TV, use a highly directional outdoor antenna, cable TV, or satellite TV.
Why is my Dynex LCD TV remote control not working?
If your Dynex LCD TV remote control isn't working, make sure the power cord is correctly connected to the TV and a power outlet. Ensure there are no obstructions between the remote and the sensor on the front of the TV, and that you're pointing the remote directly at the sensor. Also, verify that the batteries are installed correctly or try replacing them with new ones.
What to do if my Dynex LCD TV has no picture and no sound?
If your Dynex LCD TV has no picture and no sound, start by pressing the power button on the TV or the remote control. Check that the video cables are securely connected to the back of your TV and that the power cord is plugged in. Adjust the contrast and brightness settings. Ensure the correct video input source is selected. Try another channel to rule out station problems. Confirm that the incoming signal is compatible. Also, make sure the antenna or cable TV is connected correctly and securely, and check the closed caption settings to ensure no TEXT modes are blocking the screen.
How to fix Dynex LCD TV with good picture but no sound?
If your Dynex LCD TV has a good picture but no sound, first, increase the volume. Check if headphones are plugged in and unplug them. Make sure the sound is not muted and that the correct audio mode is selected. Verify that the audio cables are connected correctly and securely to the back of your TV. Ensure the antenna or cable TV is connected correctly and securely. If you are using an antenna, check the digital channel signal strength. Finally, the audio cables you are using may be bad, so try a new set.
What does it mean when my Dynex LCD TV says 'No signal'?
If your Dynex LCD TV displays a “No signal” error message, press the INPUT button and make sure you have selected the correct input for the device or service you are trying to use. If you are using a cable or satellite box, use the remote that came with that box to change channels.
How to fix dark or poor picture but good sound on Dynex LCD TV?
If your Dynex LCD TV has a dark, poor, or no picture but the sound is good, try another channel to rule out station problems. Check that the antenna or cable TV is connected correctly and securely. Make sure that the Audio Only option is set to Off. Adjust the brightness and ensure the correct picture mode is selected. If you are using an antenna, check the digital channel signal strength. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier. Also, make sure that the video cables are connected securely to the back of your TV. The video cable(s) you are using may be bad, so try a new set.
What causes after images on Dynex LCD TV?
To prevent after images from appearing on your Dynex LCD TV, do not display a still image, such as a logo, game, or computer image, for an extended period of time. This can cause a permanent after-image to be burned into the screen. This type of damage is not covered by your warranty.
What to do after Auto Channel Search when there are no channels on Dynex LCD TV?
If there are no channels on your Dynex LCD TV after an Auto Channel Search, contact your cable or satellite TV provider. Make sure the antenna or cable/satellite box is connected securely to your TV. Try replacing the cable between the antenna/cable or cable/satellite box and your TV.
How to fix dotted lines or stripes on Dynex LCD TV screen?
If dotted lines or stripes appear on your Dynex LCD TV screen, make sure that the antenna or cable TV is connected correctly and securely. If you are using an antenna, check the digital channel signal strength and, if it is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier. Also, make sure that the video cables are connected securely to the back of your TV. The video cable(s) you are using may be bad, so try a new set. Other devices may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference and then move it further from the TV.
What to do if Dynex LCD TV keeps turning off?
If your Dynex LCD TV keeps turning off, make sure that the sleep timer is not turned on.
General| Screen Size | 15 inches |
|---|---|
| Display Type | LED |
| HDMI Ports | 1 |
| USB Ports | 1 |
| Aspect Ratio | 16:9 |
| Refresh Rate | 60 Hz |
| Built-in Speakers | Yes |
| Resolution | 720p (HD) |
| Inputs | HDMI, RF, Composite |
