WE ARE GOING GREEN!
A copy of your User Guide is not provided
in the box but is available online.
Go to www.dynexproducts.com, then click
Support & Service. Enter your model number
in the Search eld, then press Enter.
Click Support/Downloads.
Connecting an antenna/cable wall jack
Connecting a Home Theater System
Using Digital audio
Using Analog audio
Connecting a DVD or Blu-ray player, cable box,
satellite receiver, or game station
Using HDMI (best)
Using component cables (better)
Using composite cables (good)
Front features
Installing the stand
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damage and scratches.
2 Secure the stand to the screen with the six screws provided.
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damage and scratches.
2 Remove the four screws that secure the stand column, then remove the column.
3 Attach the wall-mount bracket to your TV using the mounting holes on the back
of your TV. See the instructions that came with the wall-mount bracket for
information about how to correctly hang your TV.
Remote control and
two AAA batteries
32" LCD T V 720p
QUICK SETUP GUIDE
DX-32L100A13
O
UT
IN
ANT
E
NN
A
COAXIAL
AUDIO IN
This apparatus is intended to be supported by a UL Listed wall mount bracket.
Warning
Composite video
and analog audio
Connection type Video quality Cable connector
HDMI video/audio
Best
Component video
and analog audio
Better
Good
OR
OR
You can use an HDMI jack to connect a DVI device to your TV. You need to attach an
HDMI-to-DVI adapter to the end of the HDMI cable that connects to the DVI device’s jack.
Identifying cables
Your TV has several connection types for connecting devices. For the best video quality,
connect a device to the best available connection.
Connecting a home theater system with multiple devices
AUDIO/VIDEO
OUT
COMPONENT
OUT
AUDIO IN
Antenna or
cable TV
(no box)
Blu-ray player/DVD player/VCR
Cable or satellite TV box
AV receiver
Game console
or camera
Computer
TV stand and six screws (M4, 16 mm)
Volume +/-
Menu
Channel
Power button
Input
Remote
control sensor
Power indicator
/
Note: Cable is not provided.
Note: Cable is not provided.
Note: Cable is not provided.
Note: Cable is not provided.
Note: Cable is not provided.
Note: Cable is not provided.
We recommend that you connect
the AV receiver’s HDMI OUT jack
to one of your TV’s HDMI IN jacks.
Then, connect the AV receiver’s
DIGITAL AUDIO INPUT jack to
your TV’s DIGITAL OUTPUT jack
to route Dolby Digital audio.
To Next Page
Need help?
General
