Need help?Do you have a question about the Dynisco LMFI 5500 Series and is the answer not in the manual?
General| Model | LMFI 5500 Series |
|---|---|
| Category | Test Equipment |
| Test Methods | ASTM D1238, ISO 1133 |
| Type | Laboratory Melt Flow Indexer |
| Temperature Range | 50°C to 400°C |
| Load Range | 0.325 kg to 21.6 kg |
| Die Bore Diameter | 2.095 mm |
| Die Length | 8.000 mm |
| Piston Diameter | 9.474 mm |
| Units | g/10 min |
| Display | Touchscreen |
To Next Page