From lab to production,
providing a window into the process
Instrument Operation/Log-In
When the system is powered-up, a log-in screen will appear. Select Permissions Key ICON to access Log-in.
Below is a list of levels of access. The system has 3 levels of default user types. Operator, Manager and Field
Service.
The Home screen below is the initial page at Log-in. Push the top left icon to expand descriptions.
User Groups:
User Groups:
Testing only. Cannot modify programs that are stored in
memory. Can run tests and change test variables for the
current test in which the values are not saved into memory.
Can modify some of the system configuration, but cannot
run calibration.
Program Editor. Same rights as “Tester” plus modification of
programs that are stored in memory.
All rights as “Manager” plus access to
calibration
data and special maintenance information.
P/N:974179 Rev: 0918 ECO: 49667
www.dynisco.com
To Next Page
Loading...