SkyView Installation Guide 3-3
BANK ANGLE LIMIT
After Roll Axis tuning is complete, BANK ANGLE LIMIT should be set to a value that results in a
bank angle in AP that is comfortable for your plane and your preferences. A place to start is to
set BANK ANGLE LIMIT to a value that yields a standard rate turn at typical cruise speed.
The default BANK ANGLE LIMIT is 30°.
The SkyView AP will always obey BANK ANGLE LIMIT. However, if BANK ANGLE
LIMIT is set too low (such as 5°), the SkyView AP will be unable to turn.
To Next Page
