To Next PageTo Next Page
Need help?Do you have a question about the Dynon Avionics SkyView and is the answer not in the manual?
Register your Dynon Avionics SkyView system to ensure up-to-date contact information and expedite warranty claims.
SkyView products contain no field/user-serviceable parts and must be serviced at the factory if opened.
Information on accessing the electronic version and understanding guide icons and references.
Details the power specifications for typical SkyView systems and servos.
Provides physical specifications, including dimensions and weight, for SkyView system components.
Offers advice on handling debris, avoiding physical modifications, and general installation practices.
Provides recommendations for redundancy and backup systems in IFR-equipped aircraft.
Guidelines for choosing suitable locations for SkyView displays and modules.
Specifies mechanical, magnetic, orientation, and environmental criteria for ADAHRS installation.
Explains how SkyView configurations, settings, and real-time items synchronize across networked displays.
Illustrates the front bezel layout of the SV-D1000 display and its key components.
Details how joysticks and buttons are used for various functions including menu navigation and value adjustment.
Describes how to navigate through SkyView menus using a sequence of selections and actions.
Covers fundamental display operations, including system power, loss of power, and rebooting.
Lists the primary menus accessible after SkyView display boot-up.
Contains links to system configuration options like System Software and System Setup.
Provides panel cutout and mounting hole dimensions for SV-D700 and SV-D1000 displays.
Details electrical connections, power input, grounding, and backup battery setup.
Guides on configuring the SkyView network and checking module status.
Explains serial communication with non-Dynon devices and interfacing with typical connected devices.
Covers manual, automatic, and external control methods for adjusting display backlight behavior.
Details mounting dimensions and general installation requirements for the ADAHRS module.
Instructions for connecting the ADAHRS module to the SkyView network.
Procedure for accurately measuring magnetic heading by calibrating the ADAHRS compass.
Guides for locating and installing the outside air temperature probe.
Configuration of PFD-related ADAHRS settings, including Source Selection and Airspeed Limitations.
Covers AOA/Pitot Probe Calibration, Altitude Adjust, Zero Pressure Airspeed Calibration, and Pitot-Static Checks.
Details on how the SV-MAP-270 license is activated and applied to the SkyView system.
Information on terrain, aviation, and obstacle databases used by SkyView for navigation.
Instructions for downloading free aviation and obstacle data for US customers.
Shows mounting dimensions for the EMS module and discusses hardware selection.
Guidance on planning sensor installations and using preconfigured files.
Explains compatibility levels for sensors and transducers with SV-EMS-220 pins.
Wiring diagrams and pin assignments for connecting sensors to a 4-cylinder carbureted engine.
Crucial information on ensuring accurate sensor readings through proper grounding.
Provides mounting dimensions for the GPS module and installation hardware recommendations.
Details the serial connection between the GPS module and SkyView displays.
Guides on configuring serial port settings for the GPS module on SkyView displays.
Shows mounting dimensions for the backup battery and installation hardware recommendations.
Instructions on checking the backup battery status and voltage via the display.
Procedure to test the backup battery's functionality and capacity.
General guidelines for mounting servos, including location and range of motion considerations.
Overview of the autopilot electrical system, including servo wiring and power connections.
Steps for calibrating, testing, and flight-testing autopilot servos.
Parameters for tuning the roll axis, including torque, sensitivity, and mode settings.
Parameters for tuning the pitch axis, including torque, sensitivity, and gain adjustments.
Details mounting tray and transponder dimensions and installation instructions.
Guidance on harness construction and electrical connections for the transponder.
Provides the pinout details for the SV-XPNDR-26X D25 connector.
Instructions for connecting the transponder's serial communication to SkyView displays.
Configuration of essential transponder settings like HEX CODE, VFR CODE, and SQUAT SWITCH.
Shows mounting dimensions and electrical connection points for the ARINC-429 module.
Instructions for connecting the ARINC-429 module to the SkyView network.
Details harness construction and connections for ARINC-429 capable devices.
Configuration of input and output speeds for ARINC devices connected to SkyView.
Details on purchasing and installing a VP-X license for SkyView features.
Refer to Vertical Power documentation for VP-X physical and electrical installation.
Instructions for connecting the VP-X system to SkyView via a serial connection.
Configuration of SkyView display settings for VP-X integration, including serial port setup.
Steps for installing and calibrating heated and unheated AOA/Pitot probes.
Addresses the installation of the heater controller module for the heated AOA/Pitot probe.
Guides for installing Dynon's Encoder Converter to output Mode-C Gray code to a transponder.
Details for installing the converter for capacitive plate fuel level sensors.
Procedures for reinstalling and configuring SkyView components after repair.
Accessing vital operational information in the Display Hardware Information Page.
Steps for ongoing maintenance, including periodic checks and annual battery testing.
Guidance on resolving common issues like network problems, display failures, and GPS issues.
Lists the weights of various SkyView equipment components.
Details compatible engine sensors, their ranges, fittings, and Dynon part numbers.
Provides detailed specifications for the SV-XPNDR-261 transponder module.
Provides detailed specifications for the SV-XPNDR-262 transponder module.
Recommendations for wire sizing and consulting FAA advisory circulars.
Guidance on proper grounding connections for engine sensors and system components.
Information on recommended D-subminiature crimp contacts and tools for avionics applications.
Tables detailing connector pin functions for various SkyView equipment.
Detailed pinout description for the SkyView Display Male D37 connector.
Details the format of DYNON ADAHRS serial output data, including parameter definitions.
Details the format of DYNON SYSTEM serial output data, including parameter definitions.
Describes NMEA OUT (BASIC) and NMEA OUT (FULL) serial output data formats.
General| Manufacturer | Dynon Avionics |
|---|---|
| Functions | Navigation |
| Autopilot Modes | Altitude Hold, Heading, Navigation Tracking, Vertical Speed |
| Trim Control | Electric Trim |
| Weight | Varies depending on configuration |
| Power Supply | 12V or 24V |
| System Type | Integrated Autopilot System |
