SV-ADAHRS-20X Installation and Configuration
6-2 SkyView System Installation Guide - Revision K
Features Overview
Once licensed, the following features are enabled as long as SkyView has a valid GPS position
signal, the appropriate high resolution terrain database installed for the region of the world
that you are flying in, and aviation database installed.
Use of MAP menu and features, including:
o Display of airport, airspace, obstacles, traffic, and other aviation data that is
available (capabilities depend on available databases and other installed
equipment).
o All Navigation Mapping features available via the MAP menu.
o Display of obstacles and runways on Synthetic Vision (if Synthetic Vision is
licensed).
o All future updates to the SV-MAP-270 Navigation Mapping Software product.
Purchasing and Installing a Navigation Mapping Software License
A license can be purchased and applied to your system in one of two ways:
1. Call Dynon Avionics directly at 425-402-0433 with your SkyView display model (SV-D100
or SV-D700) and serial number (as displayed on the case sticker, or in SETUP MENU >
LOCAL DISPLAY SETUP > DISPLAY HARDWARE INFORMATION). An SV-MAP-270
Navigation Mapping Software License Code can be purchased for the entire aircraft you
wish to enable the Navigation Mapping Software on. This six character License Code is
then entered in SETUP MENU > LOCAL DISPLAY SETUP > LICENSE > LICENSE CODE. If you
have more than one display in the aircraft, choose one to install it onto and provide
information for only that display. Once any display is licensed, all connected displays in
the Aircraft can use the Navigation Mapping Software.
2. An SV-MAP-270 SkyView Navigation Mapping Software Certificate may be purchased
from Dynon Avionics or any authorized Dynon Avionics retailer. This certificate can be
redeemed for a license code that can be entered in SETUP MENU > LOCAL DISPLAY
SETUP > LICENSE > LICENSE CODE. To redeem a certificate simply follow the instructions
on the certificate itself. Similar to the above, you will need to redeem your certificate by
visiting license.dynonavionics.com with your SkyView display model and serial number
ready. Alternatively, you can call Dynon Avionics directly at 425-402-0433 to redeem a
certificate.
Databases
SkyView utilizes a variety of databases to display information on the moving map and present
options for navigation. These include:
Terrain data: A high resolution terrain database data is used to display the topographic
map. Available worldwide for free from Dynon Avionics.
Aviation data: Airports, nav aids, airspace, airport information, etc. Available for free for
US customers from Dynon. Jeppesen and PocketFMS data available for all other
customers worldwide.
To Next Page
Loading...
