SkyView
HDX System Equipment Installation Record, Revision A
How to Use this Document
Once completed, this document will provide future airplane maintainers awareness of what and
where SkyView HDX System components are installed in your airplane.
Installers should identify installed components by entering part numbers and serial numbers (if
serialized), along with the Station, Water, and Buttock Line location as measured from the
appropriate datums. Refer to the airplane's maintenance manual to determine an airplane's
datum locations. The installer of the SkyView HDX System equipment should use the Three-
Point Reference System to complete Table 1: SkyView HDX System Equipment List.
In addition, enter the airplane's make, model, year, serial number, and registration number in
associated fields on the cover of this document. Also enter the installer's name and date of
installation. Save the document and enter it into the airplane's permanent record.
To Next Page
Loading...
