Dyson AB10 - Technical Specifications; AB09 Technical Overview

Dyson Airblade Tap hand dryer
AB09 technical overview.
AB10 technical overview.
AB11 technical overview.
All dimensions shown
in mm (+/-5 mm)
142
266
29
7
Short
Tap dimensions
AB09 Height 159 mm Width 297 mm Depth 286 mm
Motor bucket dimensions
AB09 Height 266 mm Width 142 mm Depth 189 mm
Minimum clearance
Z 100 mm clearance from floor.
FLOOR
Fixing
locations
(4)
Fixing
locations
(4)
Water
entry point
Rear cable
entry point
286
SIDE ELEVATIONREAR ELEVATION
Visit website for full downloadable technical
specifications, sink recommendations
and pre installation guides.
www.dyson.com.au/docs
Motor bucket must be installed below
the sink, upright or on its side.
Sink/worktop thickness
Max 57 mm Min 3.5 mm