5
Clearing blockages
Tilt function
Cleaning
Height adjustment
To clean, wipe with
a dry or damp cloth.
Do not use detergents
or polishes to clean
the appliance.
Look for blockages in the
air inlet holes. Use a soft
brush to remove debris.
Look for blockages in the
small aperture inside the
loop amplifier. Use a soft
brush to remove debris.
Gently raise or lower
the loop amplifier
to adjust height.
Carefully hold the base
and the top of the air loop
amplifier. Tilt forward or
backward for the required
airflow angle.
5
To Next Page
Loading...
