11
Finding blockages
B
A
C
D
Check tools are clear
of blockages.
Release wand from
vacuum
A Remove wand by pressing
hose button and sliding
hose off wand. Check
inside wand and hose
for blockages.
B Press hose release button
at front of machine and
slide hose out with lower
cord hook at rear.
U bend inspection
C Tilt machine forward, slide
out U bend and check
inside for blockages.
Airway inspection
D Squeeze valve release
buttons and check inside
for blockages.
CAUTION
• Turn power off and unplug
before checking for
blockages. Failure to do so
could result in electric
shock or personal injury.
• If any part of your machine
becomes blocked, it may
overheat and then
automatically shut off.
Unplug machine and
leave to cool down.
•Please note: Clearing
blockages is not covered
by your machine’s
limited warranty, please
call the Dyson Helpline
on 1-877-397-6622.
•Beware of sharp objects
when clearing blockages.
•Refit all parts of the
machine before using it.
•If you hear a loud rachet
noise it means the
brushbar is obstructed.
•Disconnect the machine
before removing the
obstruction.
Finding blockages
DC14 wand
www.dyson.com
To Next Page
Loading...
