12
Brushbar maintenance
Brushbar maintenance
CAUTION
•Turn power off, unplug
machine and allow
machine to cool for 1
hour before brushbar
maintenance. Failure
to do so could result
in electric shock or
personal injury.
•Ensure soleplate is
in correct position
before use.
•Make sure all parts
have been replaced
securely before using
your machine.
Lie cleaner on its front.
Undo soleplate fasteners
using a coin and remove
soleplate.
Rest the three tabs on inside
of bumper strip and secure
soleplate back into position.
Ensure soleplate is in correct
position before use.
Dyson Helpline contact us at
1-877-397-6622
Remove lint and hair from
brushbar.
To Next Page
Loading...
