Dyson DC14 - Clearing Blockages; Wand and Hose Blockages; U-bend Inspection; Airway Inspection

B
Maintaining the mini turbine head
(supplied with certain models or available as an accessory)
11
A Release catches and remove
the soleplate.
B Remove both brushbars and
clear away thread and hair.
C To re-assemble, match the
arrows on the brushbar to the
arrows on the central support.
D Align front of soleplate with front
of tool and secure all 2 catches.
Important information
A
DC
• Remove mini turbine head
from machine before carrying
out maintenance.