1-4
Manual
AUTO mode
1-10
17
Night mode
In Night mode, your
appliance will continue
to monitor and respond
to changes in air quality
and temperature, but
only using its quietest
settings – and with its
LCD screen dimmed.
Care and maintenance
To always get the best performance
from your appliance, it is important
to regularly clean it and check
for blockages.
Changing your filters:
The display on your appliance will
indicate when to change your filters.
Order new filters online via
www.dyson.com. Your new filters
will come with instructions, go online
for further support and videos.
Do not use your appliance
without the filters in place. Unplug
your appliance from the mains
electricity supply before cleaning or
changing filters.
Error codes:
If your appliance shows an error
code, try turning it off and then on
again. If this does not clear the error
code contact Dyson Customer Care.
For further information and support
about the care and maintenance of
your appliance and replacing the
filters go online via:
www.dyson.com
04.09.2018 14:28 - C97361_HP04_OPMAN_CN_X527A-HP05-OPMAN-97361.indd_15_4c0s
To Next Page
Loading...
