8
Use both hands to lift the
appliance out of the box,
taking care to hold by the
base of the appliance only.
Do not lift out by the
amplifier loop.
Slide the buttons down on both
sides of the shrouds.
The shrouds will release with the
PTFE HEPA filters attached.
Take the carbon filters out
of the box and remove the
protective packaging.
Attach both carbon filters to
the appliance.
Position the shrouds onto the base
and push gently until they click
securely into place.
Place the remote control on the
top of the appliance with the
buttons facing down.
Plug in and switch on.
Assembly
04.09.2018 14:28 - C97361_HP04_OPMAN_CN_X527A-HP05-OPMAN-97361.indd_15_4c0s
To Next Page
Loading...
