8
Ensure that the machine is unplugged. If the appliance has been
in use, leave for 1 to 2 hours in order to allow the machine to cool
down completely. Look for blockages in the air inlet holes and in
the small aperture inside the air loop amplifier. Use a soft brush
to remove debris.
This machine is hot when in use and for a short period after use. Do
not let bare skin touch hot surfaces. If children are present, consider
positioning the machine out of their reach.
Unplug from the mains electricity supply. If the machine has been in
use, leave for 1 to 2 hours before cleaning to allow the machine to cool
completely. Dust may accumulate on the surface of the machine.
Wipe dust from the loop, filter unit and other parts with a dry or damp
cloth when dust accumulates. Do not use detergents or polishes.
Unscrew the battery compartment on the remote control.
Loosen the base and pull to remove the battery.
Battery type CR 2032.
Clearing blockages
Caution: hot when in use
Cleaning
Battery replacement
To Next Page
Loading...
