1-4
Manual
AUTO mode
1-10
19
Night mode
In Night mode, your
machine will continue to
monitor and respond to
changes in air quality and
temperature, but only using
its quiet settings – and with
its LCD screen dimmed.
Care and maintenance
To always get the best performance
from your machine, it is important
to regularly clean it and check
for blockages.
Changing your filters:
The display on your machine and
app will indicate when to change
your filters.
Order new filters on the Dyson Link
app or www.dyson.com. Your new
filters will come with instructions,
go online for further support
and videos.
Do not use your machine without
the filters in place. Unplug your
machine from the mains electricity
supply before cleaning or
changing filters.
Error codes:
If your machine shows an error
code, try turning it off and then
on again. If this does not clear
the error code contact Dyson
Customer Care.
For further information and support
about the care and maintenance
of your machine and replacing the
filters go to the Dyson Link app or
Online:
www.dyson.com/support
03.10.2018 15:10 - C97352_HP04_OPMAN_US_X527-OPMAN-97352.indd_15_4c0s
To Next Page
Loading...
Need help?
General
