Dyson purifier big+quiet formaldehyde User Manual

Changing your HEPA filter
The MyDyson™app and the LCD screen will alert you when your filter life is
running low. Replacement filters are available to buy on www.dyson.com
Remove the conic amplifier
Slide the Release button on the back of the conic amplifier to unlock.
Lift the conic amplifier off your machine.
Lift the outer cover off the base of your machine.
Remove the filter
The HEPA filter is located in the outer cover. Press the filter release buttons
located on the inner rim and lift the outer cover off the filter.
Dispose of the filter.
Install a new filter
Remove your replacement filter from any packaging. Place the filter
on the base of your machine.
Place the outer cover over the filter and press down until it clicks
securely into position.
Place the conic amplifier on your machine and rotate until it clicks
securely in position.
Plug in, switch on and reset your filter life.
Reset your HEPA filter life
It’s important to reset the filter life after replacing your filter.
Press and hold the Night mode button on the remote control.
The LCD screen on your machine will count down from five,
until a tick appears on the screen.
The filter life has been reset and your machine is ready to use.
5
sec
Pressing the night mode
button on the bottom right
of the remote control for 5
seconds.
Sideways green arrow
indicates Release switch
to open the purifier, for
access to change the
HEPA filter. Upward
green arrows indicate
direction to lift the conic
amplifier and outer
cover off.
Zoomed in green
indicators highlight
the release buttons to
remove outer cover
off the filter. Green,
upward arrow shows
direction to lift the
cover.
The reassembly is
demonstrated by first
placing the filter on to
the base, followed by
the outer cover over the
filter. Finally, referring
to green arrow
direction, position and
twist the conic amplifier.
A click indicates a
secure lock.

Dyson purifier big+quiet formaldehyde Specifications

General

Airflow	83.7 l/s
Cord length	1.8 m
Noise level	55.6 dB
Sleep timer	Yes
Air purify rate	- m³/h
Number of speeds	10
Noise level (low speed)	39.8 dB
Timer duration (maximum)	8 h
Timer duration (minimum)	1 h
Suitable for room area up to	100 m²
Package depth	780 mm
Package width	435 mm
Package height	599 mm
Package weight	17740 g
Display type	LED
Product color	Blue, Nickel
AC input voltage	100 - 230 V
Power consumption (max)	- W
Power consumption (standby)	0.5 W
Clean Air Delivery Rate (CADR)	300 m³/h
HEPA class	HEPA 13
Filter life (max)	60 month(s)
Recommended Active Carbon (AC) filter lifetime	24 month(s)

Weight and Dimensions

Depth	434 mm
Width	415 mm
Height	830 mm
Weight	11570 g