To Next PageTo Next Page
Need help?Do you have a question about the Dyson purifier hot+cool gen1 and is the answer not in the manual?
General| Airflow | 290 l/s |
|---|---|
| Cord length | 1.8 m |
| Automatic mode | Yes |
| Air purify rate | - m³/h |
| Number of speeds | 10 |
| Oscillation angle | 350 ° |
| Air purifiers functions | Cooling, Heating |
| Noise level (low speed) | 40 dB |
| Noise level (high speed) | 63 dB |
| Timer duration (maximum) | 8 h |
| Timer duration (minimum) | 1 h |
| Suitable for room area up to | - m² |
| Package width | 280 mm |
| Package height | 823 mm |
| Package weight | 7180 g |
| Battery type | CR2032L |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Power consumption (max) | 2362 W |
| Power consumption (standby) | 1 W |
| Fine particle (PM2.5) numeric reading range | 12 µg/m³ |
| Display type | LED |
| Product color | White |
| Filter life (max) | 12 month(s) |
Weight and Dimensions| Depth | 131 mm |
|---|---|
| Width | 205 mm |
| Height | 765 mm |
| Weight | 5290 g |
| Remote control weight | 25 g |
| Remote control dimensions (W x H x D) | 32.2 x 10.49 x 101.9 mm |
Details the functions and layout of the remote control buttons for operation.
Explains how to turn the machine on/off using the standby button and its monitoring function.
Describes how to activate and deactivate the continuous monitoring feature for air quality.
Details displayed information including particulate matter, temperature, and filter status.
How Auto mode uses sensors to adjust settings based on air quality and temperature.
Instructions on how to increase or decrease the fan speed using the remote control.
How to activate oscillation and select its range for air circulation.
Explains Night mode's quiet settings and dimmed display, and how to use Sleep timer.
How to set the desired room temperature and switch between heating and cooling.
Step-by-step guide to removing the old filter and installing a new one.
Procedure to reset the filter life indicator on the machine after replacement.
Instructions for cleaning the machine and checking for air inlet blockages.
Guidance on resolving error codes and contacting Dyson Customer Care.
