Dyson purifier hot+cool gen1 User Manual

Heating and Cooling modes
In Night mode, your Dyson purifying fan heater will continue to monitor and
respond to changes, but only using its quietest settings – and with its LCD
screen dimmed.
Press the Night mode and Sleep timer button to scroll through the
timer options.
Night mode and Sleep timer
Press the button to set the required room temperature.
Your machine will pause when the temperature set has been reached.
Press the Cooling mode button to switch your machine from Heating mode
to Cooling mode.
The remote control
with the Heating
mode button on
the right, below
the Information
button. The Cooling
mode button is
immediately below
the Heating mode
button.
The remote control with
the Night mode and
Sleep timer button on
the right at the bottom.

Dyson purifier hot+cool gen1 Specifications

General

Airflow	290 l/s
Cord length	1.8 m
Automatic mode	Yes
Air purify rate	- m³/h
Number of speeds	10
Oscillation angle	350 °
Air purifiers functions	Cooling, Heating
Noise level (low speed)	40 dB
Noise level (high speed)	63 dB
Timer duration (maximum)	8 h
Timer duration (minimum)	1 h
Suitable for room area up to	- m²
Package width	280 mm
Package height	823 mm
Package weight	7180 g
Battery type	CR2032L
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (max)	2362 W
Power consumption (standby)	1 W
Fine particle (PM2.5) numeric reading range	12 µg/m³
Display type	LED
Product color	White
Filter life (max)	12 month(s)

Weight and Dimensions

Depth	131 mm
Width	205 mm
Height	765 mm
Weight	5290 g
Remote control weight	25 g
Remote control dimensions (W x H x D)	32.2 x 10.49 x 101.9 mm