Dyson purifier hot+cool gen1 User Manual

Power and continuous monitoring
Stand-by on/off
Continuous monitoring
Continuous monitoring
Press the Standby on/off button on your Dyson purifying fan heater or remote
control to stop your machine. It will continue to monitor the air quality.
Press and hold the Auto mode button on the remote control for 5 seconds
to turn it on. The LCD screen will indicate when continuous monitoring is
on or off.
Continuous monitoring is turned off by default. Once turned on, it will always
be active until you turn it off again.
With continuous monitoring turned on, your Dyson purifying fan heater will
gather particulate matter and temperature information, which is displayed
on the LCD screen.

Dyson purifier hot+cool gen1 Specifications

General

Airflow	290 l/s
Cord length	1.8 m
Automatic mode	Yes
Air purify rate	- m³/h
Number of speeds	10
Oscillation angle	350 °
Air purifiers functions	Cooling, Heating
Noise level (low speed)	40 dB
Noise level (high speed)	63 dB
Timer duration (maximum)	8 h
Timer duration (minimum)	1 h
Suitable for room area up to	- m²
Package width	280 mm
Package height	823 mm
Package weight	7180 g
Battery type	CR2032L
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (max)	2362 W
Power consumption (standby)	1 W
Fine particle (PM2.5) numeric reading range	12 µg/m³
Display type	LED
Product color	White
Filter life (max)	12 month(s)

Weight and Dimensions

Depth	131 mm
Width	205 mm
Height	765 mm
Weight	5290 g
Remote control weight	25 g
Remote control dimensions (W x H x D)	32.2 x 10.49 x 101.9 mm