Dyson Purifier Cool Autoreact User Manual

Looking after your machine
Error codes
Cleaning your machine
To always get the best performance from your Dyson purifying fan,
it’s important to regularly clean it and check for blockages.
If your machine is dusty, wipe with a damp lint-free cloth.
Look for blockages in the air inlet holes on the filter and the small
aperture inside the loop amplifier.
Use a soft brush to remove dust and debris.
Don’t use detergents or polishes to clean your machine.
If your machine shows an error code, try turning it off and then on again.
If this doesn’t clear the error code contact Dyson Customer Care.
For more information and support for your machine go online:
www.dyson.com/support

Dyson Purifier Cool Autoreact Specifications

General

Night mode	Yes
Noise level	- dB
Filter model	HEPA-13
LED indicators	Activity
Air purify rate	- m³/h
Number of speeds	-
Air purifiers functions	Cooling, Fan
Suitable for room area up to	- m²
Placement	Floor
Control type	Remote
Display type	LED
Product color	Nickel, White
HEPA class	HEPA 13
Particle filtration	0.1 µm
Filtering capability	Bacteria, Fine dust, Odors, Pollen, Viruses
Power consumption (max)	- W

Weight and Dimensions

Width	220 mm
Height	1050 mm
Weight	5000 g