Dyson Radix Cyclone 8 DC07 brush control - DCO7 Maintenance and Blockages; Clearing Brushbar Obstructions; Checking for Blockages in Airways

mbling DCO7
Tilt machine forward and
slide out U-bend airway
inspection B. Check inside
for blockages.
Squeeze valve release
catches to remove airway
inspection valve C. Check
inside for blockages.
Lie cleaner on its front.
1 Undo coloured fasteners
using a coin and remove
soleplate.
2 Clear the brushbar
obstruction, carefully
cutting away any
threads.
Replace soleplate and tighten
fasteners.
1
2
B
C