5. Q:How to turn on the alarm
？
A,1. Go to
'
Home
'
page and click
'
Setting
'
on upper right corner of this page.
2. Click
'
Motion Detection
'
to turn on this function.
3. Click
'Sound Setting'
to
turn on 'Alarm Siren'.
All about Your Smart Security
R
7. Q:What is the longest time for the camera to record
an alarm video？
A,1. It records 3 minutes maximum under 'Auto' mode.
2. If you want each video to be 10s, 15s or 20s, you can set it in App.
4. Q:What should I do if my camera doesn’t work？
A,1. Please open the camera back cover and rubber plug, find the 'P' hole,
insert a pin, and press it for more than 5s to reboot the camera.
2. Double-click the camera power button to reset the camera and add it
again.
8. Q:What if the SD card cannot be detected？
A,1. It must be a Micro SD card; at least 10 MB/S can be used (For a Micro SD
card 64GB, 128G, 30 MB/S is recommended).
2. Insert the SD card to your camera when it is power on. You will hear 'SD card
detected'. If no voice reminding, please turn off your camera and then insert the
card again. Then turn on the camera and check the SD card status in App.
3. If it still cannot be detected, try formatting the SD card and reinsert.
4. Try to use another SD card and see if it works well.
6. Q:How to find the serial number (SN) of the camera？
A,1. Go to 'Home' page and click 'Setting' on upper right corner of this page.
2. View 'Camera Info' and click 'More info', you will see the SN number.
24
To Next Page
Loading...
