1.Shut down the car engine.
2.Insert the TF card into the card slot (Attention)Please use the high-speed
TF card (class 10 )and the capacity is 8G to 64G.
3.Fix the recorder in front of windshield by holder .
4.Insert the car charger into the car cigarette lighter.
5.Connect the USB interface of recorder to car charger with charger cable.
(Attention)please fix the charger cable along the car windshield when fixing
6.Start the engine ,check whether the dash cam is installed correctly
(Attention)When the dash cam is installed correctly, dash cam will turn on
automatically and start to recording, the light is turn on. Pay attention to
checking the image on the screen and make sure whether it is normal.
7.In the first time use TF card,please format the TF card, and go to menu
setting,set correct date/time and save the setting.
8. Please format TF card 1 time for one to two months according to usage.
1.Auto recording function
When engine starts, device will start and record, When engine shuts down,
device will be power off and files will be saved automatically. Files are saved
by segments, when TF card is full, early files will be overwritten.
A.The recording time can be setting in the movie mode, ranging as the
following 4 items, 0min,1 min,3mins,5mins,
B.The recorded videos and photos are saved in TF card, files name are
movie and photo separately
【Remark】time segment of recording can be set to be 1/3/5 minutes.
1)At status of suspending recording, press Menu button long time to enter
2)At status of suspending recording or recording mode, press OK button 1
To Next Page
Loading...