EasyManua.ls Logo

E-Ace M308 - Common Issues and Solutions

E-Ace M308
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
.Q&A
If have problems when using,please try these methods
below:
Q:How many capacity memory cards are supported?
A:Its maximum supported memory card capacity is 64G, and the dash cam
only supported class 10 memory card.
Q:I opened the loop recording, but the memory card is still full.
A:Because the dash cam locks important files without being overwritten, you
need to remove the memory card and format the memory card with your
computer.
Q:How to see my driving route
A:You need to download GVPlayer on your computer and then use your
computer to read the video information from the memory card(There are
detailed operations below).
Q:Can I see my speed on the dash cam?
A:You can see your current speed in the lower right corner of the dash cam
screen being recorded.
Q:Can’t take photo and recording
A:Check if the TF card has enough space or locked
Q:Automatically stop when recording
A:Use the high quality high-speed TF card with SDHC because of big FHD
video data, only suggest use Class 10 TF card
Q:Unclear video
A:Checks if there are any dirt or fingerprint,please use lens paper to clear
the camera lens.
Q:Cross stripe interference in image
A:Because of wrong “light frequency”, please set it to 50Hz or 60Hz
according to the local power supply frequency. When stop recording, press
Menu button then long press Menu button, find Flicker in General Settings,
then press OK to change the frequency.
Q:Crash
A:Restart by pressing shortly on “RESET” button after crash.