3)At photographing function, press Menu button once to enter setting of
At status of being recording, press Menu button once to lock present file.
The dash cam is built in G-sensor ,if a serious vehicle collision
happens,recorders will lock current video file immediately at accident, the
locked video is saved as a special file, which never can be covered. The
G-sensor sensitivity have 0-4level, or if you don’t need, you can choose OFF.
In General Setting-Protect Level setting.
【Remark】G-sensor sensitivity can be adjusted.
Under suspending recording mode, press Menu button once to “Movie
Mode”, then long press Menu button, enter into “General Setting”, select
“Clock Settings” option, press OK button to set.
【Remark】Up and Down key is for adjusting time and date, press OK key is
for next option; to record right time and date for accident proof, please select
local correct time before using device.
At status of being recording, press Down button once to turn off/on audio
Or at status of suspending recording, press Menu button to enter Movie
Mode -Sound Record -ON/OFF
【Remark】Setting will be saved automatically.
At status of suspending recording, long press Menu button to be
photography mode, then long press Menu button to be playback interface,
look for file in need, press OK button to play it back. Press Menu button
once entry into setting of the playback (you can press OK button into video
type to enter emergency, the emergency is lock video).
At playback interface, then long press Menu button to be photo interface,
look for photos in need, press OK button to view image. Press Meun button
To Next Page
Loading...