E-Collar Technologies Barkless Pro BP-504 - How to Program the Device

10
HOW TO PROGRAM
BarkLess BP-504 Manual
1. Change Mode
- Wh
en pressing the button shortly, 5 modes (Count Mode
,
Stim
ulation Level Setting Mode, Sensor Sensitivity Mode
,
Pa
vlovian Tone On/Off Mode, Test Mode) will be cycled in turn
s.
2. Cha
nge Mode Settin
g
- To
change the mode setting, press the button for 1.5 second
after moving to the mode you want to change. LCD displa
y will
be
blinking with buzzer soun
d.
- P
ress the button shortly to change the value. All the settin
gs will
be
switched in turns whenever pressing the button.
- To
save the setting and exit setting mode, press the button for 2
second. LCD display will stop blinking with buzzer sound.
- If 10 second passed without button touch during change mode
,
the
last setting will be saved automatically and exit the settin
g
mo
de. The status will be switched to Count Mode.
3
. Idle
State : If there is no button touch or sensing barkin
g,
Barkle
ss Pro will be switched to Count Mode and LCD display
will be turned off.