E-Collar Technologies Barkless Pro BP-504 - Setting Stimulation Levels

12
STIMULATION LEVELS SETTING MODE
BarkLess BP-504 Manual
Barkless Pro has 10 levels of stimulation mode. L.0 is Tone Only
mode. L.1 to L.8 are Stimulation mode and L.9 is Auto mode.
- To
change stimulation level, press the button for 1.5 second a
t
Stim
ulation Level Setting Mode. LCD display will blink and sho
w
cu
rrent setting.
- Initial value is L.0 which means “tone only”.
- P
ress the button to change the stimulation leve
l.
Le
vel will be switched from L.0 to L.9 in turn
s.
- P
ress the button for 2 seconds to save the changed value
.
LCD d
isplay will stop blinking.
- If Auto mo
de is selected, Barkless Pro will increase the stimula
tion level in order from L.1 when dog barks within 3 second from
latest barking. If there is no barking during 10 minute
,
stim
ulation level will be reset to L.1 again
.
- Auto mo
de is great for owners who want to have the stimulation
le
vel adjusted automatically. Not all dogs respond to the auto
mo
de. Please make sure your dog responds appropriately
before leaving him alone.