What to do if my E-FLITE Carbon-Z Cub Toy has oscillation?
- JjrojasJul 27, 2025
If your E-FLITE Toy is experiencing oscillation, there are several potential causes. It could be due to flying over the recommended airspeed, in which case you should reduce your airspeed. Other causes include a damaged or imbalanced propeller or spinner, requiring replacement or balancing. Flight condition variations may necessitate adjusting the gain. Motor vibration can be addressed by replacing parts or correctly aligning and tightening fasteners. Also, check for a loose receiver (align and secure it), loose aircraft controls (tighten or secure parts), or worn parts (adjust gain or replace worn parts). Irregular servo rotation may require servo replacement. Ensure the splines of the prop, spinner, and back plate are aligned, and consider decreasing gain if necessary.