E-FLITE Park 180 User Manual

Park 180 Brushless Outrunner Instructions
Thank you for purchasing the E-flite Park 180 Brushless Outrunner motor. This motor is ideal for 3D models 2-3 oz
(55-85g), and sport and scale models 3-6 oz (85-170g) or models requiring up to 30 watts of power.
Park 180 Brushless Outrunner Features:
• Ideal for 3D models 2-3 oz (55-85g) and sport and scale models 3-6 oz (85-170g)
• Ideal for up to 30 watts
• Designed for firewall mount or carbon tube mount
• Includes mount, mounting hardware, and 2mm gold BL connectors
• Extremely quiet and lightweight - just .3 ounces (8.5 grams)
• Upgraded performance motor for indoor motors
• High quality construction with ball bearings and hardened steel shaft
• Slotted 12-pole outrunner design
Park 180 Specifications
Diameter: 16mm (.63 in)
Case Length: 20mm (.80 in)
Weight: 8.5 g (.30 oz)
EFLM1120
Kv: 2200 (rpms per volt)
Io: .30A @ 8V (no load current)
Ri: .91 ohms (resistance)
Continuous Current: 2.6A*
Max Burst Current: 3.2A*
Cells: 2-3S Li-Po or 4-8 Ni-MH/Ni-Cd
Recommended Props: 3x3 to 6x3 ‘Slow Flyer’ for 2S or 4x4 to 4.5x3 for 3S
Brushless ESC: 4A – 6A
* Maximum Operating Temperature: 220 degrees Fahrenheit
* Adequate cooling is required for all motor operation at maximum current levels.
* Maximum Burst Current duration is 15 seconds. Adequate time between maximum burst intervals is required for
proper cooling and to avoid overheating the motor.
* Maximum Burst Current rating is for 3D and limited motor run flights. Lack of proper throttle management may result
in damage to the motor since excessive use of burst current may overheat the motor.
Battery Choices:
There are many Li-Po battery brands on the market with several choices for consumers. We recommend either E-flite
or Thunder Power batteries and list some possible choices for the Park 180 Brushless Outrunner motor, depending on
the airplane application.
THP4802SJPL 480mAh 2-Cell 7.4V LIPO, JST
THP48023JPL 480mAh 3-Cell 11.1V LIPO, JST
Examples of Airplane Setups:
Semi-Scale Aerobatic Biplane
Weight w/Battery: 4.2 oz
Prop 6 x 3 Slow Flyer
Battery: 480mAh 2-Cell 7.4V Li-Po (THP4802SJPL)
ESC: 4A-5A Brushless
Comments – Great aerobatic performance with plenty of flight time.

E-FLITE Park 180 Specifications

General

Brand	E-FLITE
Model	Park 180
Category	Engine
Language	English

Summary

Product Overview and Specifications

Key Features

Highlights the motor's suitability for 3D and sport models, and its lightweight design.

Technical Details

Lists motor specifications including diameter, weight, Kv, current ratings, and cell compatibility.

Recommended Setup

Suggests compatible propellers, cell counts, and ESCs for optimal performance.

Usage and Accessories

Airplane Setup Examples

Provides illustrative setups for specific aircraft types like biplanes and jets.

Accessories and Spare Parts

Lists recommended compatible accessories and replacement parts such as ESCs and adapters.

Operating Instructions

Guides on wiring, checking rotation direction, cooling, and propeller installation.

Installation and Warranty

Mounting Options

Details on attaching the motor using X-mount or carbon fiber tube mounting methods.

Motor Safety Precautions

Emphasizes caution with rotating parts and propellers to prevent injury during operation.

Limited Warranty Information

Outlines the one-year warranty, coverage terms, limitations, and purchaser remedies.

Support, Safety, and Legal

Damage Limitations and Liability

Defines the scope of Horizon Hobby's liability and user acceptance of product risks.

General Safety and Use

Advises on responsible operation, adult supervision, and reading all warnings.

Assistance and Repairs

Provides contact info for technical assistance and procedures for warranty/non-warranty repairs.