5 | P a g e
Manual Straighten (Home and Adjust tabs)
Click and hold the – or + to straighten the image. Release the button to stop the
adjustment. The minus symbol (-) tilts the image to the left, the plus symbol (+) tilts
the image to the right
The Brightness and Contrast buttons should be used in conjunction with each other. If the
brightness is changed, contrast may need adjusting.
Brightness (Home and Adjust tabs)
The down arrow reduces brightness, up arrow increases the brightness and AB
automatically adjusts the brightness. Click and Hold the arrows or AB to change the
brightness. The Brightness will not change on the screen until the button is released.
Contrast (Home and Adjust tabs)
Click and hold the arrows to decrease or increase the brightness.
Spot-EDIT™ (Home tab)
Use Spot-EDIT to adjust the brightness and contrast of a specific area(s) of the page.
Perfect for fine-tuning the visibility of photos.
When the Spot-EDIT button is clicked the editing graphic button displays – Pencil, erase, redact
and cancel.
1. Pencil – when clicked a magenta box or line appears
a. Making a Square editing area – Click and drag the magenta box to fit (surround)
the area to be edited. Click again to set the area
b. Making a free-hand shape – Press and hold the Alt key, then click and drag
cursor and a magenta line draws where the cursor is dragged. Click again to set
the area.
c. Making an irregular polygon shape – Press and hold the Alt key while making a
series of clicks within the image. This makes a shape with multiple corner points.
Click again to set the area.
2. Erase – click Erase to white-out the active area
3. Redact – click Redact to black-out the active area
4. Cancel – click Cancel to delete the active area or double click to cancel/delete all the
Spot-EDIT areas
Printer #1 (Output tab)
Click Printer #1 to send the image inside the green Crop Box to the library’s printer.
Remember, the area defined/inside the green Crop Box is printed.
To Next Page
Loading...
