RLanglois 10.26.16
8
4. Fast Forward – Click and hold to move film forward (when glass is
closed)
5. High Speed Forward – Click and hold to quickly move film forward
(when glass is open)
6. Slider – Click , hold, and drag the slider to the left or right of center
to move the film slowly (the further the slider is dragged from center
the faster the film moves)
7. Scan Lock – Used with Slider (when glass is closed)
OFF: When the mouse button is released the slider returns to the
center and film movement stops (Note: OFF is the
recommended setting)
ON: When the mouse button is released the slider will not return
to the center and film movement will not stop
8. Auto-Frame™ Checkbox – When checked, it cause the film to
stop when a complete image is positioned within the display, when
“Fast Reverse” or “Fast Forward” are used
Note that "Rewind", "High Speed Reverse", and "High Speed
Forward", are all grayed out in the diagram provided, indicating that
they are disabled. When the upper carrier glass is closed the
motorized roll film control looks like this. When the upper carrier glass
is open, "Fast Reverse", "Fast Forward", and "Scan Lock" will be
disabled instead.
To Next Page
Loading...
