What to do if the power is on, and the throttle is down, but the e-Joe Gadis doesn’t work?
If the power is on, and the throttle is down, but the e-Joe Bicycle doesn’t work, try the following: * Check the battery to see if it needs to be charged. * Replace the fuse, if needed. * The controller may need replacement. * The motor may also need replacement.
What to do if the power and the indicator lights are all on, with throttle or pedal assist, but the e-Joe Gadis Bicycle doesn’t work?
If the power and the indicator lights are all on, with throttle or pedal assist, but the e-Joe Bicycle doesn’t work, the controller or the motor may need to be replaced.
Why is my e-Joe Gadis Bicycle driving shorter distance per recharge?
If your e-Joe Bicycle is driving a shorter distance per recharge, you can: * Check the tire pressures. * Recharge the battery completely, or have the charger re-inspected. * Consider replacing the battery.
What to do if the power and the indicator lights are all on, e-Joe Bicycle works with pedal assist, but not with throttle?
If the power and the indicator lights are all on, and the e-Joe Bicycle works with pedal assist, but not with the throttle, the controller, throttle, or motor may need to be replaced.
What to do if the power and the indicator lights are all on; e-Joe Gadis Bicycle works with throttle, but not with pedal assist?
If the power and the indicator lights are all on, and the e-Joe Bicycle works with the throttle, but not with pedal assist, the controller, pedal assist module, or motor may need to be replaced.
What to do if the switch is turned on, and the e-Joe Gadis Bicycle takes off without using the throttle?
If the switch is turned on, and the e-Joe Bicycle takes off without using the throttle: * Check if the throttle is stuck in the on position. * Lubricate or replace the throttle if it is faulty.
What to do if I plug in the charger to my e-Joe Bicycle and the green light comes on?
If you plug the charger into the e-Joe Bicycle and the outlet, and the green light comes on instead of the red light, indicating it isn’t charging: * Check to see if the batteries are fully charged. * Ensure the charger is properly plugged into both the battery and the outlet. * Check the voltage of the charger and battery. * Replace the charger if there is zero voltage on the charger. * Check the fuse if there is zero voltage from the battery.
What to do if e-Joe Gadis has power on but motor not working?
If your e-Joe Bicycle has power but the motor is not working, try reinstalling the battery or replacing the fuse.
What to do if I connect the power to the charger, but the indicator light does not come on for my e-Joe Gadis Bicycle?
If you connect the power to the charger, but the indicator light does not come on, check whether there is electricity to the charger. If you have a voltage meter, you can check to see if the charger produces the correct current.
Guide for attaching the handlebar subassembly to the main frame.
Connecting electric wires for various components like display and throttle.
Testing and adjusting the bicycle's braking system for safety.
Instructions for securely fitting the seat and pedals onto the bike.
Proper procedure for installing and removing the e-bike battery.
Essential checks and preparations before the initial ride.
Guidelines and advice for safe and efficient operation while riding.
General| Battery Type | Lithium-Ion |
|---|---|
| Gears | Shimano 7-Speed |
| Range | Up to 45 miles |
| Weight | 55 lbs |
| Suspension | Front Suspension Fork |
| Frame | Aluminum |
| Brakes | Front and Rear Disc Brakes |
| Tires | Kenda |
| Tire Size | 26 inches |
To Next Page